Sunday, October 2, 2016

My Car Show Post. [Import Evolution - Boston]

I apologize for the lack of posts lately. I have not really had a chance to blog much lately.

It is safe to say that I am not a huge car show guy. I enjoy them to an extent, but I am certainly not a diehard. I have been to a handful of car shows in the past 15 years. About 2 weeks ago, however, my friends at Pro-Spec Autosport reached out to me and asked if they could use the FJ in their booth at the Import Evolution show that weekend. Though I wish I had a little more notice as I would have liked to do a few things to the truck beforehand (and I tried), I was happy to lend it to them for the show. I left the truck with my good friend Brian on Wednesday evening so they could clean it up in time for roll-in on Friday morning and I picked it up the following Tuesday.

I took a ride in to the city on Saturday afternoon to check out the show. As I mentioned, it has been a while since I have attended a show of this nature, but, in some ways, it felt as though I had not missed a beat and stepped back into the 90's when I entered the World Trade Center in the Seaport of Boston. There were some very nice projects on display, but I venture to say that there were far more cars to which I could only internally face-palm.

Though not my ambition in a build, I can certainly respect the work that a true "show car build" demands. I can appreciate the time, work, money, and dedication devoted to a quality build. There were a few of those this weekend. What I cannot and will not ever fully understand is corner-cutting. There was quite a bit of that.

Attending and participating in car shows is an effort. It is a hobby that requires dedication and a substantial amount of time and I am not even talking about the car itself. I am talking about the traveling - many people attend shows from different states, taking time off from work and planning to travel for a day or more just to reach the destination of the event. Many people stay in hotels and plan their weeks or weekends around car shows. Then there is the show itself. Roll-in is usually the day or night before. Then the day or two or three days of the show. Hours upon hours of walking around or sitting around during the show. Needless to say, it takes a devoted person. I suppose it just does not seem logical to me, if one's aspiration is to participate in car shows or display their project, their pride and joy, and undertake and endure these efforts and these sacrifices to expose their projects to the general public, to willingly open it up to discerning eyes (and criticism), that one would then cut corners.

I was actually talking to my buddy about it the day of the show. We stepped outside of the blaring music and flashing lights for a few minutes and walked up to the top of the building where he smoked a cigarette and I admired the Boston skyline. He knows how I feel about authentic parts and cutting corners. I think, though he does not necessarily agree with me 100% of the time, that he respects my viewpoint. I expressed for the 100th time my mentality of "saving for a little longer" that the readers of this blog are all too familiar with, to which he responded with his form of acquiescence. (Or maybe he just did not want to hear me gripe any further.) Either way, it is funny. As we stood there, away from the loud music and bright lights, I told him about a message I had received a few days before from a follower of the blog. The gentleman wanted some stickers for his car. A portion of the message read something along the lines of, "I love this blog. Not many like it." I remember laughing when I read it. There are many people who hate this blog because they believe I am an elitist or a "mod snob." Or their feelings are hurt. Or whatever… Believe me, I get that. I certainly do not aim to please everyone. At the same time, I do not strive to make enemies. If encouraging people to support the pioneers of the industry and save a bit longer to buy authentic over replicas and knock-offs makes me elitist, then I guess, yes, I am elitist. (A little while later, while walking around the show, my buddy introduced me to someone as "the guy who runs the JDMphasis blog." I turned to him after and told him that he was likely not doing me any favors.)

If you are reading this post, you are probably looking for some pictures from the show. My approach to the show was to walk around once and not take any pictures and then a second time and snap a couple shots with my phone. Fake wheels and fake aero galore. So much funk faked. I do not like to feature cars on this blog that I know are rocking fake parts. I believe that is the reason I am not just posting my mediocre coverage of this event and instead am sharing my thoughts on car shows in general - because, sadly, I would have roughly four pictures to share if I stuck with authentic-only builds. This show got me thinking and, thus, I suppose, inspired this post.

I know people use the budget logic as an excuse for corner-cutting. "Not everyone can afford real wheels or real aero," as well as the "I build my car for me. I don't care what you think" rationale. Frankly, I do not buy it. The amount of money devoted to showing cars and enjoying this hobby and building something you call your pride and joy, why not hold off on those Rotas, Varrstoens, or Shine or Outcast Garage or No-Name body kit for a few more weeks and support the originator? Despite what you would like people to believe, it is possible. As for not caring what anyone thinks because you build your car for you… Keep telling us that while you plaster pictures of it all over the internet and display it at shows.

Call me a hater. Unlike the page because you do not like my tone or your feelings are hurt. Bluntly, I was just a bit underwhelmed with what I saw. I expected more. Do not get me wrong, there were some great builds there, but there were far more cringe-worthy cars on display. As I mentioned, fake wheels and aero all over the place. Fake Bride seats. There were a couple cars with decals displaying brands of parts that were nowhere to be found on the car! No joke. At one point I walked by a widebody FRS with a swan neck Voltex wing (real thing seen here on Jason Hoang's of LifewithJson FRS) and I remarked to my buddy who has some knowledge about this particular car as he has done some work on it, "I like the Voltex wing," to which he turned and whispered to me, "It's not real."

It is what it is. I know my disapproval and ranting is not going to change many minds or convince many people to forego their corner-cutting tendencies and build a legitimate car with authentic, original parts, but why not give it a shot?

Be the Funk. Don't Fake It.

A few shots from the show...

Beantown.

Clean NSX on Meisters…


Again, not necessarily my cup of tea, but the work of this interior was legit! 


Andddd… The "Voltex" wing.


Liberty Walk G37 sedan...

Love the matte white of this Liberty Walk R35...



Black Fleet by Rays Engineering...

Wish I could say the aero is authentic...






Runduce… AUTHENTIC!

LOVE these Works...

And the one and only shot I took of the FJ...


JDMphasis… Innovation over Imitation

3 comments:

  1. This comment has been removed by the author.

    ReplyDelete
  2. Finally a pic of your fj!! Hope you take some pics of it with your z when it's ready!

    ReplyDelete
    Replies
    1. I hope to get some good pictures when the Z is underway… Unfortunately, I know it won't happen overnight.

      Delete