Monday, December 31, 2012

Happy New Year from JDMphasis...

We wish all our followers a happy, healthy, and prosperous 2013... 

And may you achieve all the goals for your automotive projects.


JDMphasis... Innovation over Imitation

Friday, December 28, 2012

Amusing Photography...

My compulsion towards the parts of the Japanese Domestic Market is not based on a personal assessment of performance superiority. It is about design, quality, and attention to detail. Likely my biggest obsession of the industry, Power House Amuse is quite possibly the superlative of JDM parts. Hardly boring or run-of-the-mill, the products that come out of their facility in Chiba are not simply functional components to be admired momentarily pre-installation only to be forsaken shortly after brusque acknowledgment of any performance benefit or gain. Every Amuse part contains an all-too-real element of genuine automotive artistry.


Just the tips...


Tuesday, December 25, 2012

Merry Christmas from JDMphasis...


Here is wishing all of our readers/followers a happy and healthy holiday season...

(If Santa happened to leave you some mod money, we hope your use of it supports the real innovators of our industry. Buy authentic.)


JDMphasis... Innovation over Imitation

Saturday, December 22, 2012

A [JDMphasized] Visit from St. Nicholas

Inspired by Clement C. Moore's 1822 poem, "A Visit From St. Nicholas" (also called "Twas the Night Before Christmas")


A [JDMphasized] Visit from St. Nicholas

Twas the night before Christmas, when out on the road,
Not a vehicle whirring, it had not even snowed.
My harness snug over my breastbone prepared,
In the hopes that my cautiousness would not soon be dared.

The tires were sticky, all with full tread,
While visions of canyons romanced in my head.
No drama was certain, no need for a map,
The goal was simple: to get nowhere; ASAP.

When from the rear bumper there arose such a howl,
I smirked when I heard it. That exhaust really growls!
Down went the windows, even just at a cruise,
A note so vibrant, it must be Amuse.

The moon on the crest of the freshly-waxed hood,
Gave the lustre of diamonds, shining. It should!
When, what to my wondering eyes should appear,
But a miniature box up ahead in the clear.

A small Christmas package, alone in the road,
Where did it come from? A car? Whose load?
More rapid than eagles, my sleigh amply looped,
I braked, and I swerved. Responsive, my coupe.

As dry-weaved carbon at the circuit does fly,
When it meets resistance, aerodynamics apply.
So up to the obstacle, there, in the street,
With my heart beating swiftly, I planted my feet.

"Now, Tein! Now, Cusco! Now, Project Mu!
Come on, Advan and Falken, I need you to glue!"
Two hands on the wheel, braking into a drift,
I came to a halt, a few feet from the gift.

I sat for a moment, foot still on the clutch,
Shift into park, brakes hot to the touch.
So up to the box, I approached and withdrew,
With my hazards engaged, and a flashlight, too.

And there, in the street, a real Christmas distress,
This ornately wrapped present, soon to be ownerless.
Engine earnestly idling, driver door still ajar,
I picked  up the package and got back in the car.

 The discarded gift now secure in my sled,
I had to decide in which direction to head.
Light on the clutch, pulling back in the road,
My mission to now find the home of my load.

Not knowing where to deliver this bright yuletide smile,
I blindly kept driving, mile by mile.
Then a voice in my head bade me abandon my course,
And pull to the side to discover its source.

Up ahead on the right I spotted a lot,
Not a soul in sight, this I deemed a good spot.
A turn of the wheel and a flick of the shift,
Put me in position to open the gift.

I spoke not a word, but went straight to the box,
Peeled back the tape, then turned like a fox,
I heard a merry chuckle drown out my exhaust,
I knew in that moment this gift was not lost.

I popped open the door, and peered toward the moon's glow,
And that's when I saw it - right there, on the bow.
It read 'Happy Modding! From Santa' handwritten,

That jolly old elf knew the mod bug had bitten.



Wednesday, December 19, 2012

Project G37S: Exhausted

First, a big 'Thank You' goes out to my pal, Ben (Bulletproof Automotive), and the artists of titanium at Power House Amuse for making this beautiful exhaust possible. Secondly, this entire project, going back almost three years, would not be nearly what it is today without the help, guidance, and patience of my good friend, Brian, and the other guys at JT Motoring. Constant communication as well as daily picture updates made this most recent stage of upgrades quite an enjoyable experience, where I was in-the-know, being consulted with every decision. I'm sure I drive both of these guys nuts sometimes, but I hope they know their efforts are profoundly appreciated.
__________________________________________________

Rules? Here are my rules: What can be done with one substance must never be done with another. No two materials are alike. No two sites on earth are alike. No two buildings have the same purpose. The purpose, the site, the material determine the shape. Nothing can be reasonable or beautiful unless it's made by one central idea, and the idea sets every detail. A building is alive, like a man. Its integrity is to follow its own truth, its one single theme, and to serve its own single purpose. A man doesn't borrow pieces of his body. A building doesn't borrow hunks of its soul. Its maker gives it the soul and every wall, window and stairway to express it.
 Rand, Ayn. (1943). The Fountainhead

This passage from one of my favorite books, Ayn Rand's The Fountainhead, is a commentary on individual expression and beauty of form. I believe it applies to so much more than architecture. In many ways, the project of an automotive enthusiast provides an opportunity to give it the soul. That project becomes an expression of that enthusiast and, ultimately, finds its own truth; its theme

It has been quite some time since I have posted any sort of update on the G. That is, in large part, due to the fact that, for the better part of the past year, I have been awaiting the arrival of the new exhaust system. As many of the followers of JDMphasis know, Amuse is my biggest obsession of the Japanese Domestic Market. Put simply, everything Amuse is automotive art. This V36 coupe had the honor of sporting the first Amuse exhaust system to hit the United States (for a V36, of course). I would rather not get into the details of why I felt it necessary to change things up, but I did. (Satisfaction with the product played absolutely zero part in the decision.) That said, I am more than extremely happy with the new system. 

To give some background, the conception of this exhaust occurred in October of 2011, when I initiated the first discussion with my friend, Ben of Bulletproof Automotive, of having Power House Amuse build a 'one-off' system for this car. A brief conversation with Amuse took place at the 2011 Tokyo Auto Show in which they confirmed this could be done. At that point, it took weeks to iron out exactly what we wanted to do. On the surface, this may look like a run-of-the-mill R1-Titan system with two extra tips, but that is hardly the case. (We all know there is no such thing as a "run-of-the-mill" Amuse exhaust system.) Every consideration was taken into account during the planning stages of this design, including the vehicle's suspension modifications and acknowledgement of the vehicle's Zele Performance rear bumper. Likewise, every detail was addressed in the initial diagraming of the actual system, from volume desired, to piping diameter, to the degree to which the tips were to be staggered, to the length and diameter of the tips, to the muffler and tip finishes, etc...

When the planning was completed, we had to relate everything accurately to Amuse so they could then begin the prototyping. To my understanding, finding a V36 coupe on which to design and test this system proved a rather noteworthy challenge. Ultimately, Amuse had to resort to renting a vehicle. This whole process, from start to finish, took close to 11 months. Enduring the wait proved to be trying, tedious, and arduous at times. However, I can honestly say, now that I have the exhaust in my possession, it was absolutely worth it to possess a completely custom, 'one-off' system built for me by one of the best, if not the best, exhaust manufacturers in the world.

Truly one of the most alluring specimens of automotive artistry, this exhaust is something that should be on display,  hanging on a wall somewhere, and not hiding under a car. Along those lines, I understand many people will be of the opinion that spending the amount of money this system cost on something that mounts under the car is borderline insane, but to each his own. Whenever I hear those criticisms, I consider a quote across which I came a while back by Apple founder, Steve Jobs.

When you're a carpenter making a beautiful chest of drawers, you're not going to use a piece of plywood on the back, even though it faces the wall and nobody will ever see it. You'll know it's there, so you're going to use a beautiful piece of wood on the back.

I acknowledge that there are maybe a handful of people across whom I will come that will actually recognize and appreciate those purple and gold tips peeking out from underneath my rear bumper, but that is not important. I am not building this car for anyone but myself. The quality, attention to detail, and exclusivity are the factors that made the decision to build this system an easy one for me. These are the aspects of this build that, as alluded to in the above Rand passage, contribute to the one central idea; the one single themeof this project as a whole. I know what has gone into this build. In the end, that is all that matters.

Enjoy a few pictures of this 'one-off' exhaust by Power House Amuse.





  • Custom Power House Amuse Quad-Tipped Exhaust System
  • Power House Amuse R1 Silent Front Pipe


COMPARE - 'Old' top/'One-off' bottom

Notice the piping going into the front muffler of the new exhaust system versus the older system. The piping on the older system protrudes just a bit more as it rounds its way toward the mid pipe, where the newer system is more "squared" coming back around the mufflers and into the midpipe. When I ordered the first Amuse exhaust I was warned that I may have to do some minor modification to make it fit due to the fact that it would be the first V36 exhaust to come into the United States and they had not tested the exhaust on a US-spec G37. Due to emissions controls present in the US, as opposed to Japan, US-spec vehicles are equipped with a "charcoal canister" (evap canister) that does not come on the JDM vehicles. That canister needed to be removed to make the first Amuse system mount up properly, as that rounded piping would not clear it. With the new system, that issue was addressed with the piping being more direct and not making quite as big of a loop around the muffler body.

Of course, this custom quad-tipped Amuse exhaust is not something that Zele Performance anticipated when they created their rear bumper, so it had to be modified to accommodate the two extra exhaust tips. I wanted the end result to appear clean, as if it came from the factory that way, so simply trimming the rear bumper was not going to be good enough. We decided to create new "tunnels" in the rear bumper. This took some work. The body shop fabricated a mold and designed the two outlets for the exhaust tips using a metal template that was later fiberglassed once positioned properly and then sprayed.

IN PROGRESS...


COMPLETED...







With the rear bumper in the body shop's possession, I decided now might be the right time to address some paint issues with my front bumper. A few imperfections were confronted. Namely, a couple tiny chips spawned from shoddy removal of the bumper by a previous shop; chips that were disreputably covered with the ink of a Sharpie marker. I also used this opportunity to add some matte black accenting to both the front and rear bumpers. I think the contrasting blacks allow the lines of the Zele bumpers to become a bit more apparent. We also added some aggression to the front bumper with a set of First Molding carbon fiber winglets and finally mounted the (functional) Top Secret titanium tow hook.

A couple shots of the contrast between gloss and flat...


The First Molding Japan carbon fiber winglets were painted black on the bottom and edges and then re-clearcoated. It's all in the details...




Some other changes during this stage of modification:

  • Swapping of anti-sway bars from Stillen to Cusco 
  • Swapping the front strut bar from Stillen to Cusco (powdercoating the mounts Wrinkle Red
  • Installing the Limited Edition Personal Top Secret steering wheel 
  • Painting the exterior Mount Fuji Infiniti emblems to flat black
  • Installing Samco hose kit
  • Swapping out all engine bay bolts and washers for stainless steel


There were a few minor hiccups while the G was in the shop that will be addressed next month. We will be swapping out the brake pads, doing a bit more with the engine bay, swapping out the lug nuts, and maybe something else special (and perhaps a bit unexpected). I will also clean the car up a bit. At that point, we will likely do a full photoshoot of the G, which will allow for seeing better these changes to the car as a whole. 

Stay tuned... 

Tuesday, December 18, 2012

Camber for Christmas

Aggressive V36 sedan in Japan...

Access Evolution aero...

Rays 57Motorsport wheels stretching out some rubber...

Friday, December 14, 2012

MCR NIssan Z34

A few shots of the MCR Nissan Z34 which features an array of top-notch parts from brands such as Advan, ARC, Bride, Endless, Enkei, and Nismo...




Wearing flat black Advan RS-Ds...



Monday, December 10, 2012

Project G37S: Teaser...

I plan to publish a comprehensive breakdown and analysis of the upcoming changes to the G in the next week or so...

For now...


Saturday, December 8, 2012

Eat, Sleep, not so JDM...

Why the sticker?

I recently came across this picture on Facebook. Who am I to criticize? To each his own, right? Regardless, I feel obligated to point out, with aero from a company that sells and replicates the parts of multiple legitimate Japanese companies along with a set of knock-off wheels, I am hard-pressed to find anything "JDM" about this Z. We all know this is not the only car to cut corners with poor-quality fake parts, but rocking that sticker is just a funk-faking slap in the face. If contributing to the subversion of JDM is the goal, I suppose we could consider this a success. Why do we encourage this type of modifying? Why do we feature and showcase these builds? And worse, why do we compliment and LIKE them? [/Rant.]



JDMphasis... Innovation over Imitation

Wednesday, December 5, 2012

'Meh'... to 'Yeah!'

It is not JDM, but it was pretty impressive.

Last week I had the opportunity to take a 2012 Jeep Grand Cherokee SRT-8 out for a little spin. I owned a 2008 Jeep Grand Cherokee Overland a few years ago - a very nice vehicle to daily drive. I acknowledge that this is a completely different animal, but nonetheless, I was still somewhat 'meh' when presented with the opportunity to get behind the wheel. However, I have to say, this beastly grocery-getter did not disappoint. 

[Enter the juiced SRT-8 model

The handling characteristics were nothing short of inspiring and strikingly assuring. I feel confident suggesting that, had I been blindfolded as a passenger in this vehicle, I would question whether or not I was in a sport utility vehicle. That is how planted and staunch the beefed up suspension and square set-up of 295/45 rubber have this Jeep. I was not able to travel too far, but I did stomp on the gas and was thoroughly excited to experience the 465 ft-lbs. of torque.

Had I an extra $60,000+ sitting around, there is a good chance I might have one of these as a daily driver.

A few phone shots:



I prefer the previous model's centered exhaust tips...




Monday, December 3, 2012

Saturday, December 1, 2012

You get what you pay for...

A phrase that is thrown around on message boards, forums, and social networking sites, "You get what you pay for..." has become an easy hindsight criticism. However, sadly, it is often true. We encourage support of the innovators and true pioneers of the industry here at JDMphasis not only because they are the masterminds behind these designs and technologies, but because they have earned their reputations. They are legitimate companies that do the necessary research, testing, and developmental footwork necessary to build respectable products.

Another failure of a knock-off TE37 wheel.



Coilover fail from an obscure company, Function and Form.



Is cutting corners for a nod from the stance crowd really worth it when you risk your safety?

JDMphasis... Innovation over Imitation

Monday, November 26, 2012

Two Years...

Today marks the 2-year anniversary of the first post on JDMphasis. If someone had asked me then to predict how many page impressions JDMphasis would have today, I solemnly would have guessed a number far less than half of the current total. For the followers and readership of this blog, I am extremely grateful. The basic principles around which this blog was founded are simple. 


  • Passion and intrigue into the parts of the Japanese Domestic Market. 
  • A desire to encourage support of the true pioneers and innovators of the industry and, correspondingly, to discourage corner-cutting in builds. 
  • A means to chronicle and document my own personal project.

In the introductory post two years ago, I wrote, 

...I consider myself a rather sincerely devoted enthusiast. I pride myself on the research, time, and money that go into my projects, as well as the people with whom I surround myself to provide service, guidance, and advice... Modifying my cars is a bit more than a hobby to me. It is a passion.
I have been extremely lucky. This blog was started as a result of encouragement and support from a few people in the industry with whom I have been fortunate enough to build solid relationships. And better; friendships. At the same time, I have had some bad experiences. This has allowed me to gain a proper perspective. I believe it is important to associate one's self with those people who care just as much about you and your project as they do about putting a dollar in their pocket. These are the people who enhance the industry. Those networking practices are what builds the tuning car culture. That is the passion that fuels the industry. That is the sort of fellowship that makes this industry special and unique. That is what defines the industry we love.

That said, I would like to thank a few people for the success of JDMphasis. I would like to thank my very good buddy, Brian, who has not only been with me since Day 1 of my project, but who was probably the most influential encouragement I had in creating this blog. Secondly, I would like to thank the President of Bulletproof Automotive, Ben Schaffer. Ben has been a great resource over the years and, in recent years, an even better friend. Third, I want to thank Jay of JDMEGO. Jay needs no introduction. Likely the OG of staunch support of originality and authenticity, quite simply, Jay is someone from whom every modifying enthusiast should take notes. And lastly, thank you to everyone who reads and follows JDMphasis. Your support is sincerely appreciated.


JDMphasis... Innovation over Imitation 

Thursday, November 22, 2012

Happy Thanksgiving from JDMphasis


We tend to forget that happiness doesn't come as a result of getting something we don't have, but rather of recognizing and appreciating what we do. - Frederick Keonig

Tuesday, November 20, 2012